Tel: +66971565410

  • Home

  • ESS Rapid-Rate Temperature Change Cycle Test Chamber

ESS Rapid-Rate Temperature Change Cycle Test Chamber

  • Home

  • ESS Rapid-Rate Temperature Change Cycle Test Chamber

ESS Rapid-Rate Temperature Change Cycle Test Chamber




ESS Rapid-Rate Temperature Change Cycle Test Chamber

GX-1030-RTC GAOXIN NEW Rapid-rate temperature test chamber able to perform variable rate of the different stress screening, optional heating and cooling rate: 5℃/min, 10℃/min, 15℃/min. it able to perform ESS, condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.

Temperature 
  • Temp. range: -70~+180℃
  • Heating rate: -55~+155℃ (linear or nonlinear 5℃/min, 10℃/min, 15℃/min)
  • Cooling rate: +155~-55℃ (linear or nonlinear 5℃/min, 10℃/min, 15℃/min)
  • Temp. fluctuation: ±0.5℃ 
  • Temp. uniformity: ±1.5℃/2℃
Humidity
  • Humidity range: 20%RH~98%RH
  • Humidity fluctuation: ±1% RH
  • Humidity uniformity: ±2% RH
Heating/Refrigerating system
  • Heater: Nickel chromium alloy heating wires
  • Fan: Multi-wing centrifugal fan
  • Air cooling, water cooling
  • Compressor: Semi-closed Germany Bock, Bitzer
  • Refrigerant: R404A, R23, R508
  • Humidifier: Steam humidifier
  • Evaporator: Fin and tube heat exchanger
Temperature/Humidity controller
  • South Kroea TEMI
Test chamber structure
  • Material: SUS 304 stainless steel and A3 cold roll steel sheet with powder spraying
  • Thermal insulation: PU foam + glass wool
  • Inspection window: Built-in electric heating window
  • Cable hole: dia.50mm
  • Movable and fixed casters
Internal chamber dimension(capacity)
  • 500X600X500mm 150L
  • 500x750x600mm  225L
  • 600x850x800mm 408L
  • 1000x1000x800mm 800L
  • 1000x1000x1000mm 1000L
  • 1200x1000x1250mm 1500L
Advanced feature
  • Energy-saving: PID + PWM principle of VRF (refrigerant flow control), energy saving 30%
  • Low-noise
  • Two sets over-temperature protection, if machine malfuction, another set of independent over-temperature protector monitoring chamber temperature and protect test samples
Test Criteria
  • MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC

 

Create a website for free Online Stores